The Lamp Module is the simplest and most effective way to control your household lights. You can turn on/off your lamps by remote control, with a timer, or with your computer. You can even use your telephone. It is home lighting at your command. Just plug a lamp into the Lamp Module, and plug the Lamp Module into any wall socket. Control with a remote control system (a Remote Controller in conjunction with a Transceiver Module). Lighting control is simply a plug-in away.

The Remote Chime is designed to work with the Smart Floodlights or Wireless Motion Detectors to provide a pleasant chime when someone approaches. It can also be activated using the correct House Code and Unit Code from any Remote Controller, such as the Mini Controller (HC-XPPHC01).

This is an additional wireless Door/Window sensor for a security system. This sensor transmits wireless signals to the security console when a door or window is opened. Up to 16 sensors can be installed for the security system. Mount at your door or window using the provided foam tape or screws. Up to 4 additional magnetic switches may be added to this transmitter (counts as one zone). Uses 2 AA batteries.

This is an additional call pendant for the X10 wireless personal assistance system (HC-XPPPC01). Pressing the Emergency Call button will trigger the dialer to go into its alarm mode and call up to 4 pre-programmed numbers.

This is an additional keychain remote control held remote for the X10 security system. Features Arm and Disarm buttons, "Panic" option and remote operation of one X10 controlled device such as a lamp. Features arm and disarm buttons, panic option and remote operation of 1 controlled device such as a lamp.

This is an additional hand held remote control for the X10 security system. Features Arm in the Away mode, Panic button, Delay entry options, Security Light remote control and remote operation of 4 other X10 PRO controlled devices.

This is an additional miniature Door/Window Transmitter for use with the Linear DVS-2400 Security System. It is a battery powered stationary transmitter. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal to its companion receiver.

This is a small additional remote siren for use with X-10 PRO Security Systems. Tripped by signals from the main console. It is smaller than the HC-XPPSH01, with the same functionally but it is only rated at 105db.

This is an additional Key Ring Transmitter for use with the Linear DVS-2400 Security System. This is a two-button, three-code transmitter. Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation. It is powered from two 3-Volt Type 1616 lithium batteries with an expected battery life of up to 5 years. A detachable key ring is provided with each transmitter.

This is an additional Wristband Transmitter for use in emergency applications with the HC-LNPERS3KIT Linear Personal Emergency System. It is waterproof and it is supplied with a wristband, a pocket clip, and a Nylon pendant necklace. Pressing the button on the transmitter sends a digital coded wireless signal to the main console. The unit's battery is not replaceable. The transmitter should be discarded at the end of its battery life which is about 4 years.

This is an additional Pendant Transmitter for use in emergency applications with the HC-LNPERS3KIT Linear Personal Emergency System. It is a one-button, one-channel Pendant Transmitter is a battery powered, portable, miniature pendant transmitter. Pressing the button on the transmitter sends a digital coded wireless signal to the main console. The battery has a life of about 1 year. When the transmitter does not function, or its range decreases, replace the battery.

This is an additional remote siren for use with X-10 PRO Security Systems. Tripped by signals from the main console. Place several Powerhorn sirens around your home's interior, garage, attic (near a vent), etc. Piercing 110dB siren requires no wiring, just plug it directly into an electrical outlet! A screw hole allows solid mounting against the wall so the unit cannot be easily yanked off by a burglar.