This is an additional keychain remote controller if you already have the Keychain Wireless Remote Control System with a Transceiver. The Transceiver is required to have the keychain remote control lights and appliances, but if you already have it, all you need is additional keychain remotes. Everyone in your family should have one.

The Lamp Module is the simplest and most effective way to control your household lights. You can turn on/off your lamps by remote control, with a timer, or with your computer. You can even use your telephone. It is home lighting at your command. Just plug a lamp into the Lamp Module, and plug the Lamp Module into any wall socket. Control with a remote control system (a Remote Controller in conjunction with a Transceiver Module). Lighting control is simply a plug-in away.

This inexpensive wall switch can replace ordinary wall switches in minutes to give you remote control of lights operated by a wall switch. The push button allows you direct manual control over lighting like any standard light switch. Now you can turn your lights on /off from your chair, from upstairs or anywhere without having to get up and turn on/off the switch. You can dim lights which previously you couldn't. Can be used with loads up to 500 watts.

This Screw-in module provides remote control of lights in a closet, shop, or a garage. It can also remotely control any lights that have pull-down on/off cords, or any lamp socket not having a plug-in cord. Great addition to any lighting by remote control system. Control a lamp and a light fixture requiring a normal light bulb from across the room, or from the other side of the house. Easy to remotely control a light fixture - just screw it in. Easy to install because it's wireless!

Automate or remotely control appliances from across the room or from the other side of your house. Just plug an appliance into the Appliance Module, and plug the appliance module into any socket. Control with the Remote Control System Kit or other Lighting and Appliance Remote Controllers or Timers. Works with fans, air-conditioners, humidifiers, dehumidifiers, coffee pots, stereos, TVs and more!

Indoor motion sensor automatically turns lights on as you approach . After you leave, lights go off after an adjustable time delay of 30 seconds to 30 minutes. Photocell automatically adjusts during daytime for day and night, or night only operation. Can be used with incandescent or fluorescent lamps. Easy to install, replaces standard wall switch. Great for rooms, hallways or intermittently occupied spaces. Great energy saver. Select white or ivory switch.

Perfect for use in a room such as a bedroom to operate lights and appliances by remote control. Control 8 Lamp or Appliance Modules. Just plug it in and you are in control! This unit sends commands automatically through the power lines to control your lighting or appliances. Has Dim/Bright, All Lights On and All Units Off buttons. Select switch allows control of unit codes 1-4 or 5-8. Lighting and appliance control is a plug-in away!

This appliance module is used to control larger load appliances such as your Jacuzzi or hot tub, water heater; air conditioner; dryer and other 220 volt, 20 amp appliances. With the Heavy Duty Appliance Module, just think of the possible energy savings! Simply plug your 220V appliance into the socket on the bottom of the appliance module, and plug the appliance module into any 220V wall outlet. Then set the module to the particular code you wish to assign, and you are ready! You can now control this appliance from any location in your house with a remote controller. The controller can be another simple plug-in remote controller, a remote timer or a wireless remote control. Or you can use with a telephone responder to effect control from your office or car!

Great solution to having a switch to control an outlet with a lamp or an appliance. Great for bedrooms where the lamp outlet is across the room and you have to walk in the dark to turn the lamp on because there is no switch. Easy to install. Just plug-in the receiving module, and screw the transmitter switch to any wall within 50 feet.

Control your whole house from any location where there is a standard electrical outlet. Maxi-Controller sends signals over your existing house wiring to control lights connected to any Lamp or Wall Modules or to control any appliances connected to an Appliance Module. Controls 16 Modules at the touch of a button. Just plug it in...no wiring necessary. Great for security, the all-lights-on button instantly turns on all your lights if you hear a suspicious noise at night. Great for energy savings, the all-units-off button turns off all your lights with a single keystroke. You can dim and brighten incandescent lights. Has a group function that allows you to operate several individual devices at the same time.

Add a wall switch anywhere in minutes with a wireless add-on switch. Simply replace your existing wall switch with the "receiver" switch. Next mount the "transmitter" switch on any desired wall up to 50 feet.

For outside lights, use a Motion Activated Outdoor Light. Not only it is a good security item, it saves energy. When someone walks in front of the light, the sensor detects this motion and the light is activated. No need to leave lights on all night. The light now works only when necessary. It warns of intruders while saving energy. Adjustable timing and sensitivity. Fully assembled and easily installed. Can replace any existing outdoor light. Has a manual override. Photo eye deactivates lights during daylight.