This additional Supervised Passive Infrared Motion Detector Transmitter is a battery powered passive infrared motion detector with a built-in transmitter designed for use with the Linear DVS-2400 Security System. Supervised means that the security system keeps track of each sensor. This transmitter can be used in a variety of motion detection applications. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded wireless signal to its companion receiver. It can send three different signals: alarm, low battery and status. The unit is powered from a 9-Volt alkaline battery. The battery's life can be up to three years depending on the area's traffic. When the battery gets low, the test indicator will flash and a low battery signal will be sent to the receiver when the detector senses motion. Approximately every hour, it will send a status transmission to the receiver. The hourly signal updates the receiver to the transmitter's condition. By monitoring status transmissions, the receiver can determine if a transmitter has a low battery or has been removed from the system. In a typical installation, the motion detector is mounted indoors in a corner or on a wall between six and eight feet high. The sensor will monitor the infrared level in its detection pattern. If the level increases or decreases rapidly (as when a person moves through the area) the transmitter triggers, sending an alarm signal to the receiver.
FEATURES:
· Alarm, supervisory, and low battery transmissions
· Walk-test mode
· Fresnel lens with 24 facets
· Battery saver circuitry
· 9 volt alkaline battery supplied
· DXS format
· RF frequency: 315 MHz
· Size: 3.2" W x 4.4" H x 1.75" D
Manufacturer: Linear Corporation
Manufacturer warranty: 1year
Product questions: 800-421-1587